![background image](http://html1.mh-extra.com/html/octave/jubilee-pre/jubilee-pre_manual_723769011.webp)
11
4. CONNECTIONS
4.1 REAR PANEL JUBILEE PREAMPLIFIER
(Power amplifiers are also normally
grounded.) If the INPUT MODE switch is in
the ASYM position, XLR inputs are con-
nected by default; GROUND LIFT does not
work for this input.
12
Phono preamp inputs (RCA/CINCH)
These inputs are active in the PHONO
INPUT MODE ASYM setting. The RCA /
CINCH inputs are wired in parallel to the
balanced (XLR) inputs. You can therefore
use either the RCA / CINCH or the XLR
sockets to connect a phono preamplifier.
13
Tuner input (RCA / CINCH)
Additional line level input for a radio tuner
14
AUX input (RCA / CINCH)
Additional line level input for other sources
such as a video recorder or a television.
15
CD input (unbalanced RCA / CINCH)
Additional input for CD player
16
Tape inputs/outputs
Analogue inputs/outputs for two recording
devices (cassette, DAT or CD recorder)
Tape 2 REC
Output (record) Tape 2
Tape 2 PLAY
Input (replay) Tape 2. With option BYPASS
tape 2 play is the bypass input. Gain from
bypass to RCA out is 0 dB for gain low and
+ 6 dB for the balanced outputs.
Tape 1 REC
Output (record) Tape 1
Tape 1 PLAY
Input (replay) Tape 1
Outputs (2 x RCA / CINCH / XLR)
Output to power amplifiers in unbalanced
mode via the RCA / CINCH sockets or in
balanced mode via the XLR sockets.
17
RCA / CINCH outputs
Two sets of output sockets for connecting to
two separate power amplifiers with unbalan-
ced inputs (RCA / CINCH)
18
XLR outputs
Two sets of XLR output sockets for connect-
ing to two separate power amplifiers with
balanced inputs.
19
Special
power connector
for the out-
board power supply
Содержание JUBILEE Pre
Страница 1: ...JUBILEE Pre ...