5
Replacing Virtuo Jukebox Touchscreen Glass
Replacing the Touchscreen Glass
After the nuts that held the camera have been removed (items 1 and 2 in the previous figure), set the camera
aside while you install the replacement glass.
Set aside all the nuts you remove as you will be re-using them later. Do not lose the nuts as there are no
replacement nuts in the kit.
9 Loosen the screws on the brand bar. Do NOT remove them. This is to ensure that you can safely remove the
monitor/glass assembly without damaging it.
10 With one hand positioned on the bottom rear of the monitor and the other supporting the glass and monitor
from the front, gently push the unit forward and lift it out and away from the Virtuo door.
Remove touchscreen monitor and glass from Virtuo (300955-001 monitor model shown)
IMPORTANT:
Before you remove the final (top-middle) nut, ensure that you or an assistant is
holding the glass in place from the front.
