20
Replacing Virtuo Jukebox Touchscreen Glass
Replacing the Touchscreen Glass
37 Gently insert the unit into the Virtuo jukebox. The touchscreen glass gasket should be placed inside between
the brand bar and the plastic. When moving to the interior of the jukebox, use one hand to continue supporting
its front on the exterior.
Place unit on the jukebox
38 Re-fasten the nuts (finger-tight) to their studs except for the two nuts for mounting the camera following the
numbered sequence shown in the figure
Sequence of nuts to remove (300955-001 monitor model shown)
The numbered sequence follows an X pattern.
39 Place the camera assembly onto the top of the monitor at the level you marked in step 7.
40 Fasten the camera assembly to the monitor with the two remaining nuts (finger tight), make sure the USB
cable is routed toward the right, and re-align the camera with the opening in the black backing of the
touchscreen glass.
IMPORTANT:
Ensure the glass is properly seated on the Virtuo jukebox. Failure to do so can
cause the glass to break.
