9
Ethernet cable recommendations:
Using Shielded, Stranded CAT6 or CAT7 cable will ensure maximum
signal integrity plus optimum rejection of external interference.
UTP CAT5 and CAT6 cables can be used with your Octava system
though they may result in limiting the maximum attainable distance
between the Matrix and the Rx unit when running HD signals.
Cable Type
Note
1
CAT 7 cable is recommended
Best
2
Shielded CAT 6 cable is recommended
Good
3
UTP CAT 6 cable
For short links 50ft or
less.
Use EIA/TIA-568-B standard when terminating your CAT5, CAT6 or
CAT7 cables.
Ethernet cable installation recommendations:
Use your cable suppliers recommended RJ-45 connector/crimp tool
with your CAT5, CAT6 or CAT7 cables and ensure you pay particular
attention to the quality of the termination on all cables.
DO/Recommend
Use shielded CAT 6 or CAT 7 with good RJ-45 terminators
Use a direct cable connection between the Matrix and
Receiver unit.
DO NOT
Do Not connect thru Ethernet switches or routers
For optimum signal integrity avoid passing your signals
though any form of Patch-panel, Wall-plate or punch-down
terminations
Do Not connect cables thru extraneous RJ-45 couplers,
wall plates.
Do Not tightly coil /loop the Ethernet cables