4
USER SETTINGS
Press and hold / to display programming options.
Warm-Up
Controls 3-minute warm-up:
ON
or OFF
Clock
Direction
Controls clock counting:
UP
or DOWN
Max
Workout
Time
Sets limit for workout time: 1 to 99 minutes (factory-set at
30:00
). Press
Enter
to scroll in
15-minute increments, or enter value using number keypad.
Unit Type
Controls weight and distance display units:
ENGLISH
(pounds and miles) or METRIC
(kilograms and kilometers)
Beep
Controls console sounds:
ON
or OFF.
900MHz
(800 MHz)
Channels
Initiates channel programming; press
Enter
to begin. Press CH
(
)
to select the appropriate
program modes for your facility:
P-1 = MYE Entertainment 900MHz (800MHZ) transmitters
P-2 = Cardio Theater LCS 900MHz (800MHZ) transmitters
P-3 = Cardio Theater / Enercise x TV 900MHz (800MHZ) transmitters
P-4 = BroadcastVision 900MHz (800MHZ) transmitters
T
o automatically scan and program channels:
With the proper transmitter mode displayed, press
Enter
to auto-scan and lock
transmitters. Repeat as needed for each transmitter type.
Press CH
(
)
or CH
(
)
to verify that “PRESET” appears in the display, indicating that all
transmitters have been locked in.
Press
EQ
to save 900MHZ (800MHZ) CHANNELS and return to user settings.
To manually program channels
:
With the proper transmitter mode displayed, press
EQ.
Press CH
(
)
or CH
(
)
to scroll through all transmitter channels.
To add or delete a transmitter channel press
Enter
. NOTE: “PRESET” will appear in the
display when a transmitter channel is programmed.
To exit manual program mode press the EQ button. The display will blink briefly and will
default to first transmitter channel programmed.
Use the CH
(
)
or CH
(
)
to select another transmitter type (P-1 to P-4) as needed and
repeat these manual steps.
Press
EQ
to save 900MHZ (800MHZ) CHANNELS and return to user settings.
900MHz
(800MHz)
Near/Far
Sets the reception sensitivity of the 900MHz (800MHz) receiver,
FAR
(for most installations)
or NEAR (when receiver is installed 1-5 feet from a transmitter). Press
Enter
to switch from
one setting to the other. The Message Center displays the revised setting for 5 seconds,
then returns to 900 MHZ (800MHZ) NEAR/FAR.
Brightness
Controls brightness of the console LEDs: 1 (dim) to
8
(bright).
Exit
Press
Enter
to Exit and save settings. Press Pause Clear twice to exit without saving.
Содержание xR6000
Страница 2: ......
