2
A. Route Audio Cable
Remove CSAFE port from keypad plate. Wrap
grommet C-1 around audio cable. Route cable
down through hole in keypad plate and secure
grommet in hole.
B. Keypad (with Receiver) and Audio Jack
Connect keypad cable from base to keypad,
and connect audio cable and receiver cable
to receiver.
xR6000 ENTERTAINMENT KIT ASSEMBLY INSTRUCTIONS
Complete these instructions during initial assembly of the xR6000 seated elliptical, after mounting the keypad
on the mast. For a fully-assembled xR6000, remove the console, console back cover, keypad and cable, top
cover, and right side shroud to complete these instructions. *Retain all screws for use in this assembly.
Place keypad with receiver on keypad plate;
attach through top 2 holes with C-2 (Qty 2);
tighten.
Position audio jack mounting bracket beneath
keypad plate; attach bracket and keypad
through bottom 2 holes with C-3 (Qty 2); tighten.
Connect audio cable to audio jack assembly.
Insert pins of audio jack assembly (top) into
holes in mounting bracket and snap into place
under the keypad. The edges of audio jack
assembly snap underneath the edge of the
keypad for a tight fit. Position bottom piece of
audio jack assembly and and secure to audio
jack mounting bracket with C-4 (Qty 2).
Down here
Pins in holes
Fit under edge
of keypad
Audio
Cable
Receiver
Cable
Keypad
Cable
Содержание xR6000
Страница 2: ......
