3
Route coaxial cable and power cord up mast.
Remove power cord slack from within unit and
secure excess cable outside the base with
attached cable tie.
C. Audio Jack
Remove bottom screw from water bottle
holder.
Connect audio cable to audio jack assembly
(not illustrated).
Loosen screws on audio jack assembly; place
assembly over mast plate; tighten screws.
Secure with screw to water bottle holder.
Remove upper left screw from water bottle
holder; insert C-2 (Qty 1) through C-4 (cable tie);
re-attach to water bottle holder and tighten.
Route audio cable through mast hole to
console; secure with C-4.
PRO4700 ENTERTAINMENT KIT ASSEMBLY INSTRUCTIONS
A.
Mounting Bracket
Attach bracket to LCD-TV using C-1 (Qty 4).
Insert L-1 (Qty 2) part way into top shaft of
bracket.
B. Mast and Power Cables
With assistance, tilt the unit to one side to install and
secure power cord according to the following instructions:
Route power cord through hole and clips in
base.
Complete these instructions during initial assembly of the PRO4700 elliptical, after mounting the keypad on the
mast. For a fully-assembled PRO4700, remove the console, keypad and cable, top cover, and left side shroud to
complete these instructions. *Retain all screws for use in this assembly.
WARNING!
Do not mount an LCD-TV weighing more than
8.5 lbs. (3.8 kg)
on the LCD-TV mounting arm.
Cables
not
shown
Secure excess
power cord
outside of base
