1
USER INSTRUCTIONS
PRO3700 ENTERTAINMENT KIT
KEYPAD, CONSOLE AND LCD-TV WITH MOUNTING ARM
L-1
L-2
L-3
L-4
L-5
L-6
C-1
C-4
C-2
C-3
#2 Phillips
#2 Phillips
#2 Phillips
PRO3700 ENTERTAINMENT KIT CONTENTS
Console Box Contents:
LCD-TV Mounting Arm Box Contents*:
LCD-TV Box Contents:
WARNING!
Do not mount an LCD-TV weighing more than
8.5 lbs. (3.8 kg)
on the LCD-TV mounting arm.
PRO3700 Entertainment Keypad
PRO3700 Entertainment Console
Assembly and User Instructions
Keypad Cable
Media Control (TV) Cable
Audio Jack Assembly
Audio Cable
Heart Rate Cable
Console Hardware
*Hardware illustrated to scale; not actual size
.
Route coaxial cable
(if it is not already
routed), or remove
cable tie (if cable is
already routed).
1
3
4
5
9
11
12
2
Install LCD-TV
Mounting Bracket
using small screws
(C-1).
(See User Instructions
for screw identification.)
Sharp Cardiovision shown
Remove left side
shroud; route TV
power cable
through hole and
twist clips as
shown; do not
secure with cable
tie until end of
installation.
Insert guide wire
through holes in
top and side of
mast for routing
power cord and
coaxial cable.
Pull guide wire
back through top
hole in mast
to route power
cord/coaxial cable.
Route cables one
at a time.
New
15-pin
connector
comes connected
to
new
keypad.
Connect ground
cable (attached
to new 15-pin
connector cable)
to mast.
LCD Arm Installation
6
7
Remove 13-pin
connector and
ground cable
from mast.
8
10
Insert
new
keypad
cables (keypad,
fan, and heart rate)
into mast for
connection to
console.
New
media control
cable is already
connected to
new
console as shown.
Questions?
octanefitness.com
WARNING!
Do not mount an LCD-TV weighing more
than 8.5 lbs. (3.8 kg) on the LCD-TV mounting arm.
Hole for cable
Twist clips
In
Out
Connect heart rate
cable to keypad
and install keypad
on mast (4 screws).
New
media control
cable is already
connected to
new
console as shown.
Remove 2 screws
from cupholder
(front edge and left
side).
Front edge
Left side
LCD-TV Mounting Arm
Mounting Bracket for LCD-TV
Console Back Covers (R and L)
LCD-TV Mounting Arm Hardware
(selected items only)
Coaxial Cable
*Box contains additional parts that are not used to assemble this kit.
LCD-TV
Power Cord
Remote Control
(not pictured)
LCD-TV User Manual
(not pictured)