Octagon SF 1028P HD - Noblence, Руководство пользователя

Страница: 48 / 84

48
3.2 Positioner Setting
 Satellite :
Select the satellite which you want to search for the
Service.
-
Press the
LEFT/RIGHT ARROW
button to select the satellite.
- If you press the
OK
button, a complete satellite list will be
displayed.
- Select the wanted satellite name.
- If the desired satellite name is not listed then select User
Defined.
 Tuner :
Select tuner that you want to set
(Tuner 1/ Tuner 2).
If
you have set
‘Loop-Through’
in the menu
(Installation-Dish Setting-Tuner Connection),
this
menu(Tuner) will be automatically disabled.
 Frequency :
Select the satellite frequency you want to use to check for a signal.
 Positioner :
Select the positioner.
-
None :
(No Positioner)
-
Using DiSEqC 1.2 :
Move :
To move the dish, press
LEFT/RIGHT
button.
Fine Move :
To move the dish in smaller steps, press the
LEFT/RIGHT ARROW
button.
Step :
Set to positioner moving steps as 1, 2, 3, 4
Positioner Command :
To use various positioner commands,
press the
OK
button. Then, available positioner commands
will appear.
-
Using USALS :
Move :
To move the dish, press the
LEFT/RIGHT
button.
Fine Move :
To move the dish in smaller steps,, press the
LEFT/RIGHT ARROW
button.
Step :
Set to positioner moving steps as 1, 2, 3, 4
Dish Longitude :
Enter the longitude position of the
antenna using the
NUMERIC
buttons.
Dish Latitude :
Enter the latitude using the
NUMERIC
buttons.
Go To :
Press the
OK
button to rotate the dish to the
selected antenna position.

Dish Setting : Press the OK button to move to
Dish Setting
menu directly.
 Service Search :
Press the
OK
button to move to
Service
Search
menu directly.