Assembly – assembling the bridge
1
2
Mount the driver gear. Choose a compatible driver
gear for your lens (see page 10). Locate the driver
on the output gear at the front or back of the
interlock bridge as desired. Ensure the serrations
fully interlock, then tighten the hollow knurled screw.
Assemble the bridges. Slide the LWS rod bridge onto
the main bridge. Turn the lock lever clockwise to
secure the LWS bridge in position.
The position of the main bridge can be adjusted using
the sliding dovetail when mounting the O-Focus DM
to the lens (see page 14).
Front and back output gears
Double-sided design
12
Flip-lock rod
clamp lever
