oConnor 2560, Руководство пользователя

Страница: 21 / 28

19
Maintenance
Adjust Lock Levers
If the pan and/or tilt friction locks do not fully engage at the end of the
lock lever travel, adjust the lever position as follows:
1.
Rotate the lock lever to the “locked” position.
2.
The lock lever is attached by means of a screw. Carefully peel off
the lock label to expose the screw. Using a 2.5 mm Allen key
remove the screw.
3.
Pull the lock lever off the hexagonal shaft, rotate it approx. 30°
away from the “locked” end of travel, and reinstall it.
4.
Tighten the screw. Reapply the lock label.
1 Shaft
2 Tilt lock lever
3 Screw
4 Lock label
30°