by one in effective receiving range, buzzer will sound once
when upload one barcode successfully. If fail, each barcode
will sound three times continuously. Scanning ‘data total’
barcode will show total of cache barcode. Scanning ‘clear
data’ can clear the cache. Under inventory mode, if cache is
full, scanning barcode will appear buzzer sound for long
time, at this time data should be uploaded computer and
saved, if want to continue scan, need to clear data and then
carry out next collection mode scanning.
6. Charging operation
If scanning gun’s electricity is short, should warn for any
buzzer sound when starting or uploading, etc, the specific
performance is that, the last sound of single operation will
continue 3s indication. At this time should stop scanning
and charge. Correctly insert special charging line crystal
head attached with machine into the seat of scanning gun,
and insert another end to computer USB interface or 5VDC
special USB interface power (note: please use computer 5V
USB interface or special 5VDC power supply to charge, the
informal power will cause permanent damage to scanning
gun and battery), yellow LED light will light when is at
charge state, the charging will complete after about four
hours and the yellow LED light will go out.
Function setting
1. Barcode gun recovery function setting
When barcode gun appears the situations of laser light
always illuminating, reading code or abnormal function,
first restore setting, generally, this situation is due to user
scan and read some other types barcodes of guns. Scan Page 9,
9
