SPORTS SERIES
DOCKLIGHT
.
INSTALL & OPERATION MANUAL
13
EXAMPLE CONNECTION DIAGRAM, MULTI-COLOUR
When using the Sport Multi Colour Docklights in an installation using multiple AC power supplies it is
recommended to fit relays into the DC supply side of the installation to allow lights to be controlled together
and kept in sync. The relays need to be controlled with a common control switch to interrupt the supply to the
lights to enable changing the operation mode of the lights. See below for a connection example.
All relays should be at least 20A contact rated, normally closed type. Pressing switch should disconnect
supply to lights.
POWER SUPPLY REQUIREMENTS
A suitably fused 24v supply is required for each light. DO NOT CONNECT DIRECTLY TO MAINS AC! A 7 Amp fuse /
breaker is recommended for each light.
When selecting the mains AC to DC converter(s) it is important to ensure that the overall power requirements are met,
allowing a ‘reserve’ of at least 15% of the overall power to allow for losses in cable runs.
When connecting multiple lights to one power source the OceanLED 4-way junction box is recommended as this
provides four independent separately fused outputs for each light.
