EXPLORE
E2
.
INSTALL & OPERATION MANUAL
6
4
Installation
4.1 INSTALLING THE LIGHT FIXTURE
Additional items required not supplied by OceanLED:
•
Marine sealant - 3M 4200 or equivalent
•
Cable ties
•
Waterproof Cable Connectors / Junction Box (optional)
•
Allen key (5mm)
•
Thread lock - Loctite 243 or equivalent.
DO NOT remove the light cartridge from the mounting tube during installation. The light cartridge MUST stay
fitted inside the mounting tube throughout the installation process to avoid the introduction of potential
contaminants that may damage the product and void warranty. The light cartridge can only be removed for
maintenance or after sales purposes and OceanLED must be contacted prior to any light cartridge being
removed from the mounting tube.
OceanLED recommends dry fitting all products. When installing, be sure that the light fits the area and
secures to the hull using the appropriate hardware before applying any sealant.
When applying sealant to the light fixture, use OceanLED packaging material such as the light cardboard box
when placing the light on the ground face down to prevent lens damage.
Explore E2
Kit Includes
Explore E2
Clamping Kit
