EXPLORE
E2
.
INSTALL & OPERATION MANUAL
5
Power Consumption and Recommended Fuse values
3
Preparing the Hull
When installing an Explore unit, please ensure there is enough space on the inside of the vessel to remove
the insert for maintenance/after sales services. The XFM unit requires an additional 120mm / 4.7
” from the
rear of the mounting tube to allow the insert to be removed for maintenance. (See overall dimensions in the
Appendix).
Ensure that the part of the light
inside the vessel has a diameter of 100mm/ 4” around it free from any
insulation material.
OceanLED recommends using a qualified installer / technician when making modifications to your vessel.
Please also consult the manufacturer for more detail on modifications and installation.
If lights are assembled in a conductive or wooden hull, an Isolation Kit must be used. Contact OceanLED for
additional details.
Depth/Spacing
Ideally mount your lights at similar depth levels to ensure matching colour consistency through the water. Deeper lights
will look duller and possibly differ in colour compared to shallower mounted units.
SPACING / INSTALL DEPTH
E2
Recommended Spacing
1-1.5m (3-5
’)
Recommended Installation depth (From the light waterline)
100-200mm (4-8
”)
Maximum Hull Thickness
Maximum hull thickness: 60mm
(2.36”)
Hole Cut Out
Hole Cut out size - 62mm (2.44
”) / With Isolation Kit 64mm (2.5”)
Overall Dimensions
See overall dimension schematic
– in the Appendix, Chapter 7.
Model
Current @ 12V
DC
Current @ 24V
DC
Max Nominal
Power
consumption
15% reserve in
Watts
Recommended
fuse 12V/24V DC
E2 Ultra White
3.5A
1.5A
42W
50W
4A
E2 Midnight Blue
3.5A
1.5A
42W
50W
4A
