Oceanled E6 TH, Руководство по установке и эксплуатации

Страница: 8 / 40

EXPLORE E6 & E7 TH .
INSTALL & OPERATION MANUAL
7
4
Installation
4.1 INSTALLING THE LIGHT FIXTURE
Additional items required not supplied by OceanLED:
•
Marine sealant - 3M 4200 or equivalent
•
Cable ties
•
Waterproof Cable Connectors / Junction Box* (optional)
•
Allen key (5mm)
•
Thread lock - Loctite 243 or equivalent.
*Optional 4-Way Junction box available from OceanLED. Please contact OceanLED or your representative for further information.
OceanLED recommends dry fitting all products. Before applying sealant, please ensure the surface is clean
of any dust, dirt or grease. When installing, be sure that the light fits the area and secures to the hull using
the appropriate hardware before applying any sealant.
When applying sealant to the light fixture, use OceanLED packaging material such as the light cardboard box
when placing the light on the ground face down to prevent lens damage.
Never use power tools to secure your lights; hand tighten only.
Explore E6/E7 TH
Light Kit Includes
Explore E6/E7 TH Light Locking Latch Kit