Oceanic Veo 180Nx, Руководство по эксплуатации

Страница: 58 / 80

58
To access other modes or enter settings -
 Press the button to reactivate the Surface Sequence.
 The unit will again revert to the Time to Fly and Desaturation
countdowns after 2 hours, if the button is not pressed.
 Surface Interval Times greater than 9:59 (hr:min) will be
displayed only as Hours 10-, 11-, 12-, etc. (Fig. 66A)
WET CONTACTS
If the graphic H2O appears during the Surface Mode (Fig. 66B),
Fly Mode (Fig. 67), or Desaturation Mode, it is an indication that
the water activation contacts are bridged (still wet) and the unit
must be rinsed in fresh water and thoroughly dried.
 The contacts are located in the button stem and the down-
load data port.
 Once the unit is dry, the graphic H2O will disappear from
the display.
 If the unit is not cleaned and dried prior to the countdowns
reaching 0:00 (hr:min), or making another dive, it will shut
off then automatically reactivate.
 The graphic H2O would then appear in place of Dive
Number when Surface Mode is displayed during the Surface
Sequence.
 If no dive is made after activation, the unit would shut off
after 2 hours, then automatically reactivate again if wet,
repeating the action until cleaned and dried.
Fig. 66B - Surface Mode
(unit wet)
Fig. 67 - SAT (unit wet)
Fig. 66B - Surface Mode
(SI > 16 Hours))