background image

14

BACKLIGHT

To activate the Backlight while on the surface, press and release

the button momentarily (less than 2 seconds).  During a dive

depress the button for 2 seconds

  While on the surface or during a dive, the Smart Glo®

feature senses the intensity of natural light present.  If a low

level of light is present, the Backlight will activate and illumi-

nate the display for 10 seconds.

  The Backlight does not operate during a Low Battery condi-

tion.

  Press/release the button again to activate as desired.

POWER SUPPLY

The Veo 180Nx utilizes one (1) type CR 2450 Lithium 3 volt cell

that should provide 300 hours of continuous, or 50 activation

periods, of operation.  If you conduct 1 dive each time the unit is

activated, you should obtain approximately 50 dives.  If you

conduct 3 dives each time the unit is activated, you should

obtain approximately 150 dives.

Battery  Indicator

A Battery Indicator provides an indication of battery condition.

When power is sufficient for normal unit operation, the Indicator

will be displayed during Surface Mode (Fig. 8a).  The Indicator

Fig. 8 - Battery Indicator

a

Содержание Veo 180Nx

















































































Отзывы: