Oceanic SMC 20, Руководство пользователя

Страница: 5 / 5

STEP 5
After assembling the control module you must conduct the RESET procedure.
1) Clean the Electrolytic Cell. (see Manual page 3 )
2) Assure a good water flow trough the cell.
3) Hold the ON / MAX button and then plug the unit into the power supply.
Release the button when all green LED lights illuminates. Unit will run for a 30
second in one direction (polarity). After that it stop for 5 second and start in reverse
polarity. The RESET Procedure is completed. The production level can be adjusted
accordingly to your needs by depressing the button MIN.