Oceanic OCEAISHC1000W, Инструкция по эксплуатации

Страница: 29 / 52

28
EN
resetting of the thermal cutout, this appliance must not
be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
• The heater must not be located immediately below a
socket-outlet.
• Means for disconnection having a contact separation in
all poles must be incorporated in the fixed wiring in
accordance with the wiring rules.
• For correct installation on the wall, thanks to refer to
‘Installation on wall’ part.
• Fixed heaters are to be installed so that switches and
other controls cannot be touched by a person in the
bath or shower.
• Connect the two conductors and the pilot wire of the
supply cord to a connection box in respecting the
following polarities:
- Live: Brown - Neutral: Blue
- Pilot wire: Black
•
WARNING: In order to avoid overheating, do not cover
the heater.
Warning: this product shall be installed in the volume 2 or
hors volume only according to the national wiring rules
(For France NF C 15-100)
Note: The below drawing is for reference only.
We suggest you to contact a professional electrician for
assistance.
In the case as of buildings room, a room receiving a bath
or a shower and socket-outlets lower or equal to 32 A the