Oceanic OCEACLIM120SR, Инструкция пользователя, Страница: 61 / 66

60
Problems Possible causes Solutions
The appliance
works but does not
cool the
temperature down.
- Verify if the set
temperature is higher than
the room temperature.
- Lower the set
temperature. (Please
refer to IV. Use.)
- Verify if a window or a
door is closed.
-
Close the window or
door to stop hot air
from entering.
-
Verify if any heater or
lamp is producing heat.
- Switch the(se)
appliance(s) off.
- Verify if the air filter is
dirty.
- Clean the filter.
(Please refer to V.
Maintenance and
cleaning.)
The appliance
works but does not
cool the
temperature down.
- Verify if the set
temperature is higher than
the room temperature.
-
Lower the set
temperature
- Verify if a door or a window
is opened.
- Stop hot air from
entering.
-
Verify if any heat-
producing appliance is in
use (a heater or lamp for
example).
-
Turn off these
appliances.
- Verify if the air filter is
dirty.
-
Clean the filter.
-
Verify if the air outlet is
blocked by any bulky
object.
- Remove the
obstacles.
No hot air in
heating mode.
Water leaks while
the appliance is
being moved.
- Verify if the set
temperature is lower than
the room temperature.
-
Lower the set
temperature. (Please
refer to IV. Use).
- Defrosting or cold-air
protection is activated.
- It is normal. The
appliance turns off
automatically at the
end of defrosting or
cold air protection.
-
Water tank is full.
-
Drain water.
-
The device is laid down or
the ground is not flat.
-
Always position the
appliance up-right.