Oceanic OC1 Скачать руководство пользователя страница 158

Страница: 158 / 180

158

UPLOADING SETTINGS AND DOWNLOADING DATA

The Settings Upload portion of the Oceanlog PC Interface

program can be used to set/change the OC1’s Main Time,

Date, Set A group (Alarms), and Set U group (Utilities) using the

same Interface System. The Set F group (FO2) and FREE Mode

Alarms must be entered using the OC1's button controls.

Information available for retrieval (download) from the OC1 to

the Download portion of the program includes dive number, SI,

max depth, EDT, start date/time, lowest temperature, sampling

rate, dive profile, OC1's Set Points, pressure, ATR, O2BG,

TLBG, and Gas Switching events/pressures.

Prior to attempting to download data from your OC1 or upload

Settings to it, review the Help section of the interface program.

Recommended is to print those sections of Help that you con-

sider appropriate for your Interface activities.

A USB Driver is provided on the Oceanlog CD as part of the

Interface System.

The OC1 is configured with a Data Port located on the side (Fig.

158a) that enables it to be connected to a PC through a USB

port using the special Interface Cable supplied.

To connect the PCI Cable to the OC1:

Fig. 158 - OC1 DATA PORT

Содержание OC1





















































































































































































Результаты поиска

Содержание OC1

Отзывы:

Oceanic OC1, Руководство по эксплуатации, Страница: 158 / 180

Результаты поиска

Содержание OC1

Отзывы: