Oceanic OC1, Руководство по эксплуатации, Страница: 100 / 180

100
Fig. 87 - DECO STOP MAIN
Managing Deco Stops
To fulfill your decompression obligation, you should make a safe controlled Ascent to a
depth slightly deeper than, or equal to, the required Stop Depth indicated and decompress
for the Stop Time indicated.
The amount of decompression credit time that you receive is dependent on Depth, with
slightly less credit given the deeper you are below the Stop Depth indicated.
You should stay slightly deeper than the Required Stop Depth indicated until the next shal-
lower Stop Depth appears. Then, you can slowly ascend to, but not shallower than that
indicated Ceiling Stop Depth.
DECO STOP MAIN, information includes (Fig. 87) -
> Full Stop icon (Stop Bar with both Arrows) solid
> Current Depth with FT (or M) icon
> Stop Depth with graphic FT (or M) and remaining Stop Time
(hr:min)
> ATR (min) when 60 minutes or less with graphic ATR and
Time (clock) icon, blank if no TMT
> Graphic GAS1 (or 2 or 3), one in use
> Pressure with PSI (or BAR) and Link icons, if Rcvr and TMT
are active, flashing when Link is lost
> Nx icon, if any Gas is Nitrox
> Full TLBG with NI icon