
KTA-282 Modbus TCP Weather Station Gateway
3.
Type ipconfig. This will return the current PC’s network adapter settings.
4. Ensure these settings are in the same subnet as the gateway. In this example, the PC
would be able to contact the PC at default subnet (192.168.1.x), but not on 10.1.1.x.
2.
Check your network to ensure the KTA-282 has a unique IP address within the subnet. The best
way to do this is via your router (if applicable). Otherwise you could power off the gateway, and
then send a ping request to that IP address. If that address is already taken, you
will
get returned
packets.
2.1.
Open the command prompt as above (on windows).
2.2.
Type ping <IP address>
3. Make a direct connection to your PC using an Ethernet cable, and manually configure the PC to be
7/05/2013
www.oceancontrols.com.au
Page 19 of 25