Battery Pack User Guide March 2020 P.3
Battery Pack Quick Start Guide
Opening the Battery Pack
1.
Stand the battery pack upright.
2.
Swing handles to release endcap.
3.
Dry and clean the seal to ensure no water or dirt enters the interior.
4.
Remove the inner assembly from the pressure housing.
Installing New Batteries
5.
Loosen the 3 thumb screws on the contact plate
A
until it can be lifted from the
assembly.
6.
Lift and remove the lower contact plate
A
from the assembly exposing the 12 battery
columns.
7.
Check the battery type of your model Alkaline (BP1), Lithium (BP2) or
Alkaline/Lithium Selection (BP3).
A
B
A
A
