Battery Pack User Guide March 2020 P.10
Appendix B
Webserver
1.
Open
Marco
2.
Double click on hydrophone serial number to open webpage
3.
Go to Data
→
Retrieve Page
4.
Ensure all previously recorded data is deleted from the hydrophone so the maximum
amount of data can be recorded during the deployment
5.
Under
Operations
→
Set Time
from computer
if hydrophone is not showing correct date/time set using the computer
6.
Under
Settings Tab
→
Data Collection
7.
Choose appropriate settings
a)
WAV Sampling
b)
Spectrum FFT Sampling
c)
Duty Cycling / Enable Delay if applicable
8.
Click
Apply
and wait for page to load completely
9.
Verify settings and that all changes performed on webserver have remained
10.
Disconnect unit and connect to Battery Pack
Lucy
1.
Connect to icListen on Lucy
2.
Ensure all previous data has been deleted from hydrophone so maximum amount of
data will be recorded
3.
Click on
icListen icon
(clipboard) at the bottom right of Lucy display (
Setup
).
4.
Under
Link Setup
click on Instrument Time (UTC)
Set Using PC.
5.
Under
icListen HF Setup
tab
-
Setup sampling for WAV and FFT data
-
Click
Apply
6.
Disconnect hydrophone from test cable and connect to Battery Pack
