Ocean Signal ATA100, Руководство по установке

Страница: 48 / 52

ATA100 INSTALLATION MANUAL
48 912S-03333-01.05 21/04/2020
10. MAINTENANCE
10.1 Product Cleaning
• Lightly rinse or fl ush with clean, cool fresh water.
• Do NOT wipe the screen with a dry cloth, as this could scratch the window.
• Do NOT use: abrasive, acidic, ammonia, solvent or chemical based cleaning
products.
• Do NOT use a jet wash.
10.2 Service and Maintenance
This product contains no user serviceable components. Please refer all maintenance of the
product to Ocean Signal Ltd.. Unauthorised repair may affect your warranty.
!
FCC Warning (Part 15.21)
Changes or modifi cations to this equipment not expressly approved in writing by
Ocean Signal Ltd. could violate compliance with FCC rules and void the user’s
authority to operate the equipment.
10.3 Firmware Updates
Ocean Signal reserves the right to produce Firmware updates as required. These updates
will be made available to download from www.oceansignal.com and will be accompanied
with relevant documentation including updated User Manuals.
10.3.1 To update Firmware
Download the relevant fi le and copy it to a blank USB stick. Power down the ATA100 and
use the supplied USB on-the-go cable to connect the USB stick to the USB port on the front
of the unit. Power on the ATA100 and the fi rmware will be loaded into the unit automatically
with progress reported visually on the screen. On completion power down the ATA100 and
remove the USB on-the-go cable before powering up once more.
Firmware versions loaded can be viewed:
Status System Info