Ocean Rodeo SLE Series, Руководство пользователя

Страница: 7 / 16

4. Make sure top cap is free of sand and screw “snug”,
yet not so tight you wont be able to unscrew later.
5. Pinch clamps to seal off the struts.
6. Holding kite at center of leading edge rotate so that kite
sits leading edge down and into the wind. Use a weight
(sand, fine gravel, no sharp objects) to weigh down the
leading edge of the kite.
7. To deflate use the deflate dump valve. First unscrew the
top cap, as this will make setup faster next time. Unscrew
lower cap to release air. Store with both caps unscrewed!
Helpful Tip: We recommend using a bag that contains
sand, fine gravel, etc for weighting the kite. This reduces
your kite’s exposure to abrasion.