Ocean Rodeo SLE Series, Руководство пользователя

Страница: 10 / 16

KITE MANUAL
Attaching flying lines to your
Ocean Rodeo SLE kite.
1. Before you attach your lines have your kite pumped up
leading edge down and weighted with sand or gravel.
2. Your SLE kite has front line attachments and two back
line attachments supported by line bridles, locate these
line attachment points.
• Rear line attachment lark’s head connectors are located
at the very tip of the leading edge tube. (1)
3. With the front and back attachment points free from
their Velcro storage tabs pull the pigtails / lark’s head
connectors forward so that the bridles are in clear view.
Note: Make sure the bridles are free and clear with no
twists and any pulleys are free and clear of debris. (2)
4. The rear lines connect to the kite with a foolproof
connector that prevents the front and back lines from
being incorrectly attached.
5. Make a final inspection of your bar system.
Important: If you are using an Ocean Rodeo bar with
your SLE kite make sure your stopper is pushed away
from the bar as far as possible. This will allow the bar to
freely slide up the front lines and de-power the kite in the
event of a gust during launch.
1
2