Ocean Reef ALPHA-PR0 X-DIVERS, Руководство пользователя

Страница: 8 / 16

ALPHA-PR0 X-DIVERS rel. 1.3 8
Professional surface/diver cable
(50meters -165 ft long)
(if sold separately code OR033134)
4.2 PROFESSIONAL SURFACE/DIVER CABLE
6 pin cable/wire with yellow rope exterior. The
cable’s diameter is 10mm with a resistance of more
than 4000 Newton.
The cable includes waterproof rubber 6 pin
connector at the diver side and DIN metal connector
on the surface side.
The Professional cable is also available at any length
on request ( up to 200 metres).
4000 N is the tear up strength, audio signal may be lost earlier!
It is fundamental to pay attention that the cable does not get stuck on the boat or
on the seafloor.
It is also very important to keep the cable slightly buoyant, by attaching a small
buoy or floating device to the cable a few feet away from the underwater unit.
It is a good idea to connect the cable with a hook or retractor to the BC jacket,
avoiding any traction between the surface and the underwater unit.
OCEAN REEF cable fleeter is avaiable as optional.
During the dive the surface operator must slowly feed the cable out to the
underwater diver as needed, while keeping voice contact. It is not advised to
simply throw the cable into the water. The same procedure should be used when
the dive is completed and the cable has to be brought on board.
2 cable floaters (x3) useful accessory to keep
audio/v cables floating avoiding entanglement
ALPHA PRO X DIVERS bag this bag is designed
to be incredibly durable to carry coil cables, it is
bright colored and easy to spot
Cable fleeter avoid any traction between the
surface and the underwater unit
1
1
3
2
2
3