Ocean Optics MFPF100-1, Инструкция по установке и эксплуатации

Страница: 22 / 26

3: Configuration
Note
OOISensors is configured to work with the MFPF unit. However, you can change the
OOISensors configuration to work with spectrometers using the
Configure | Software menu
item.
3. Double-click on the icon on the desktop. The main MFPF screen appears:
4. Set the MFPF parameters (located in the Instrument Controls box on the lower left of the main
screen) according to the following recommendations:
Parameter Setting
Dual Channel Unchecked for set up, checked if 2 sensors are used
Sampling Period 2 seconds for set up
14 MFPF-00000-000-02-0606