OMX-HDMI-HDBIT
Installation Requirements
1. HDMI source device such as a video camera, media player,
monitoring equipment or computer.
2. HDMI display device such as an SDTV, HDTV, or projector with
HDMI port.
3. UTP/STP Cat5e/6 network cable in accordance with the IEEE-568B
wiring standard.
4. Transmission length: Cat5-80m, Cat5e-100m, Cat6-120m.
Installation Safety
1. Identify the receiver and the transmitter in order to make proper
connections during installation.
2. Do not hot plug/swap when in operation.
3. Use
5VDC power supply only.
IR User Guide
1. Plug the IR blaster extension cable into the IR-out port of the Trans-
mitter TX.
2. Plug the the IR receiver extension cable into the IR-IN port of the
Receiver RX.
3.
Place the emitter of the IR blaster as close as possible to the IR
receiver of the signal source device.
4.
Direct the IR remote controller of the signal source device towards
the IR receiver (connected to the RX of HDMI extender), to remote
control source media playback.
Ocean Matrix OMX-HDMI-HDBIT
Page 3
