3
INSTALLATION REQUIREMENTS
1. HDMI Sources with HDMI Output
2. Displays with HDMI Input
3. Cable: UTP/STP CAT5/5e/6 compliant to IEEE-568B Standard
4. IGMP Ethernet Switch and/or Wireless Router
Ocean Matrix OMX-HDMI-2-IPV2 Installation
INSTALLATION
1. Connect the HMDI video source to the splitter HDMI IN port
2. Connect the HDMI displays to the splitter HDMI out ports
3. Connect the power supply and plug into the power source
IR USER GUIDE
1. Plug the IR blaster extension cable into the IR-OUT port on the Transmitter.
2. Plug the IR receiver extension cable into the IR-IN port on the Receiver.
3.
Place the IR blaster emitter as close as possible to the IR receiver of the signal source device.
4.
Use the remote control to select and set the channel.
Ocean Matrix
www.oceanmatrix.com
INSTALLATION DIAGRAMS
Multipoint Configuration
RX
HDMI Source
RX
TX
TX
HDMI Display
IGMP
Switch
HDMI Display
Cat5/5E/6
HDMI Source
Point to Point Configuration
RX
TX
HDMI Display
Cat5/5E/6
HDMI Source
