1x6 Balanced Stereo Audio
Distribution Amplifier
OMX-ADA6
812 Kings Highway • Saugerties, NY 12477
A Division of Tower Products, Inc.
The OMX-ADA6 is shipped from the factory already calibrated and ready to use. There is no need
for any customer adjustments for normal use of the unit. There are, however, procedures that must
be observed in order to assure proper performance of the unit in your system.
The OMX-ADA6 is a high quality, compact 1 X 6 Balanced audio distribution amplifier. With a band-
width of 30 Khz, this product is perfectly suited for those applications where an audio signal needs to
be distributed and fed along balanced lines. Several OMX-ADA6 units can be used to provide “bank
feed” signal distribution points in a production facility. The OMX-ADA6 can be used for unbalanced sig-
nals as well by simply inserting a tip/ring 1/4” phone plug into the rear panel connector.
GENERAL OPERATION
AUDIO (per channel)
Input:
Balanced, Hi-Z, Bridging (150K)
OdB Nominal on 1/4" TRS Connectors
Outputs:
6 Outputs: 600
Ω
, Balanced 1/4" TRS
0dB Nominal (Unity)
Gain:
-3dB to +3dB, internally
Freq. Resp.:
10Hz - 20KHz, @ 0; -1.2dB
S/N Ratio:
85dB: 20Hz - 20KHz
Harmonic Distribution: Less than 0.05%
Power Requirements:
110VAC 50/60Hz, 10 Watts (220V Model OMX-EU/ADA6)
Dimensions:
1.625”H x 8.25”W x 6”D, Steel Housing
Weight:
2.5lbs. (Less Shpg. Carton)
SPECIFICATIONS
OMX-ADA6
1x6 Balanced Stereo Audio Distribution Amplifier
The OMX-ADA6 can be used with unbalanced devices.
Simply insert a 1/4" Phone Tip-Sleeve into the input/out-
put connectors and feed to your unbalanced device.
1/4" Tip-Sleeve (Unbalanced) TS
1/4" Tip-Ring-Sleeve (Balanced) TRS
USING UNBALANCED DEVICES
