OMX-3GSDI-CAT5
Installation Procedures
Cat5/6 Network Cable—follow the IEEE-568B wiring standard:
1. White/Orange
2. Orange
3. White/Green
4. Blue
CONNECTION
Transmission distance up to 394 ft (120m) over single Cat6
Troubleshooting
Display shows “ Waiting for Connection”
Ensure power supply is firmly connected.
Display shows “ Signal Loss”
Check signal input of the TX.
Connect the signal source directly to the display device to
ensure there is a signal output. Change the signal source if
necessary.
Degraded video signal
Check cable lengths between the TX to the switch, the
switch to RX.
Ensure the connection between each level is within
required ranges.
Press the RESET button on the TX/RX front panel.
Ensure all connections are secure.
Ocean Matrix OMX-3GSDI-CAT5
Page 5
5. White/Blue
6. Green
7. White/Brown
8. Brown
TX
RX
SDI In
SDI Out
TV
HD
Camera
UTP Cat5e/6e/7
Cable
