Operating Instruction
For example: Repeater’s ID: 00; TX sends command to the Repeater,
the command will be: #bypass id1 baud=115200 str=#down.
Then the repeater will get “#down”.
When paired with different devices, the commands are slightly different.
ID: Through a 4 PIN DIP Switch, Set the ID number on the 3rd and 4th bits. Upper means 0,
Lower means 1. Then send the command to achieve RS-232 dual way transmission. The ID
number corresponds to the following instruction table:
Two way IR pass though is only supported between Transmitter and Receiver units. Two way
IR pass through between multiple repeaters is not supported.
IR pass through instruction:
RS-232 pass through instruction:
#bypass
0
：
all
1: ID 00
2: ID 01
3: ID 10
4: ID 11
id%
ID number
baud=%d
Baud rate
115200
57600
38400
19200
14400
9600
4800
2400
Clean with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
MAINTENANCE
1 Year
WARRANTY
