Bluetooth playback
Before transmission between your Bluetooth device and the radio is
possible, both devices must be coupled. This process is called "pairing".
The radio is served as a receiver, to receive music stream to play on the
radio.
If you have already coupled to a Bluetooth device before, this connection
will be restored automatically when both devices are in range and
Bluetooth operation has been selected on the radio. "Pairing" does not
have to be repeated. This function may need to be activated in your
Bluetooth device, however.
• Press the button to display the selection menu for the different
operating modes.
• Use the ▲ / ▼ button to select the operating mode Bluetooth and press
OK to confirm.
• Switch your Bluetooth device to which you want to connect the radio on
and activate the pairing mode here. The device scans for Bluetooth
devices in the reception range.
• When the radio is found, your bluetooth device shows its name WR-26-
XXXX (the XXXX is an identification code for your radio unit).
• Select the radio at your bluetooth device.
• Start playback on your bluetooth device.
• Playback now takes place using the radio.
Sleep Timer Setting
You can set the timer to let the radio goes standby after the selected time
elapsed in the range of 15 minutes to 180 minutes.
On the main menu, choose Sleep Timer and press
[OK]
. Choose your
desired time period and press
[OK]
to confirm. You will see the icon
appeared on the top row under the status menu (press ►button under the
playing screen to view the status menu).
To see the time remains for sleep timer, choose Sleep Timer on the main
menu and press
[OK]
. It will show the time left to go standby.
04/10/2018 Thu
8:28am
z
ST
RDS
z
-
11
-
z
z
