6
Connecting to your WiFi Network
The screen below will appear. You can choose Yes to proceed to search for the available WiFi
network. If your router has the WPS function, you can select the “Yes[WPS]” to proceed.
It will then start scanning the network. After the search is done, it will display a list of the
available router.
Choose your router from the list, enter the WEP(Wired Equivalent Privacy) or WPA(Wi-Fi
Protected Access) code. If your network is not configured to be with the WEP or a WPA code,
the unit will connect to the router automatically.
Note: The encryption code would have been set up by the person who set up and
configured your network.
Please refer to the “Remote control character list” for you to enter the passwords. Press the
“→” button to go to the next word, press “←” button to delete the wrong word you have entered.
If you want to enter the passwords on the radio main unit, you can use the Volume Dial rotary
knob. Follow the steps below:
- Rotate the knob to select the character
- Press the button to go to the next entry
- After you finish the entries, push down the Rotary knob to confirm.
The radio will start connecting to the network.
Enter Password
1/1
!
MOVE
"
INPUT:
# $
OK
8
16:23
01:44
Linksys
Homeaudio
Demo
<
1/6
>
01:01
YES
Yes(WPS) NO
Would you like to
configure Network now?
