Ocean Breeze Micro Series, Инструкция по эксплуатации

Страница: 10 / 41

Make sure the mounting surface is clean. When
installing the Condenser Unit, there must be a
minimum clearance to service the Condenser
Coil, Electric Box.
Lay out the power cables to the unit.
Use conduit or seal tight flexible conduit.
Lay out the Condensate Drain Piping as close to
overboard as possible. If you are reclaiming
condensate water run the pipe to the collection
area.
When the installation of the AC Unit Is complete,
be sure to clean up the area before continuing to
the Evaporator installation. Keep all
interconnection pieces sealed until needed to
avoid debris deposit in the tubes. If there is
more than one unit, repeat the above process.