Ocean Aire AIR BOSSR410A, Руководство пользователя

Страница: 11 / 32

ACCESSORIES
CEILING PANEL DUCT KIT, CK-12, CK-16
A ceiling panel kit is available for discharging
the condenser air above a drop ceiling.. The
ceiling panel duct kits are furnished with a
white vinyl coated flexible duct that allows for
convenient installation. A 2ft X 2ft ceiling
duct- panel is included to replace a 2ft X 2ft
drop-ceiling panel where the connection is
desired.
The CK-12 is available for all Air Boss models
except the 5-ton. The ceiling panel kit
consists of 8 feet of flexible duct, a 2' X 2' lay
in ceiling panel and a 12 inch duct flange that
attaches to the condenser air discharge
opening on the top of the unit. The CK-16 (for
5-ton units) consists of a ceiling duct-panel,
and a 16 inch flexible duct.
Note—Drop ceiling spaces should be
vented or large enough to handle the
warm condenser air. Check local codes to
assure compliance
.
If longer runs of duct are required, table
below lists maximum duct run with no 90°
elbows. For every 90° elbow, subtract 6 feet
from the run.
Ceiling Kit Model
Flexible Duct
Diameter X
Length
Fits
PAC12
Fits
PAC18
Fits
PAC24
Fits
PAC36
Fits
PAC60
CK-12
Size/Fits
12 inch X
8 feet
No No
CK-16
Size/Fits
16 Inch X
8 feet
No
No No
Maximum Approx
Equivalent Feet
(ESP)
25
(.20)
50
(.25)
50
(.25)
50
(.25)
100
(.50)
2 x 2 CEILING
DUCT-PANEL
VINYL COATED
FABRIC DUCT
DUCT FLANGE
DUCT STRAP
DUCT FLANGE (DF-12, DF-16)
The optional duct flange allows for round flexible ducting to
be attached to the Air Boss condenser discharge.
DF-12 (12-inch diameter) fits PAC12, PAC18 and PAC24.
The DF-16 (16 inch diameter) fits PAC36 and PAC60.
DUCT FLANGE
9