Oce VarioPrint 6000 MICR series, Руководство пользователя

Страница: 6 / 32

Instructions for safe use
Introduction
All the products have been tested in accordance with the strictest international safety
standards. Please read the following sections before you connect the machine to the
power supply. These sections contain important information with regard to the user
safety and the prevention of equipment problems. Make sure that you observe the safety
rules hereinafter. This helps to assure that you can work with the product safely. Make
sure that you observe all the precautions mentioned below.
Note:
Some parts of the contents of this section may not be applicable to your product.
Note:
Please refer to the corresponding Safety Data Sheets for specific safety information. You
can download the Safety Data Sheets from the support site of your product at
http://global.oce.com/support/.
Disassembly and Modification
Warning
• Do not remove covers and panels that are fixed to the machine. Some machines have
a high-voltage component or a laser beam source inside that could cause an electric
shock or blindness
• Do not modify this machine, since this could cause fire, electric shock, or breakdown.
If the machine contains a laser, the laser beam source could cause blindness.
Caution
• Do not carry out maintenance activities on components and maintenance materials
other than the components and materials that are mentioned in the user manual.
• Do not place any liquids on the machine.
• Do not open any door while the machine starts up or runs, unless the operator panel
displays a message asking you to open one or more doors.
• Only use maintenance materials or other materials for their intended purpose.
• To avoid any risk, only properly qualified and trained service technicians are allowed
to modify the machine.
• Do not bridge any mechanical or electrical circuit breakers.
Note
• Keep maintenance materials away from children.
Chapter 1 - Safety information 6
Instructions for safe use