Oce TDS860, Руководство пользователя

Страница: 126 / 330

126 Océ TDS860 User Manual
▼
Manual file name definition
1
Select a destination.
2
Open the ‘File’ menu and select ‘Properties’.
The ‘Destination properties’ screen displays (see Figure 61 on page 122).
3
Select or clear the check box ‘Add correct file extension’ to add or leave out
the file extension. Set the file extension in the Océ Settings Editor.
4
Enter a name in the ‘Base name’ text box.
Remove the ‘###’ part, this part is used for automatic file naming. You can put
dots in the ‘Base name’.
5
Click ‘Apply’ to accept the destination properties.
The ‘Destination properties’ screen stays open and is ready for the next
scan-to-file action after the current original is scanned.
6
Scan the original.
7
Repeat steps 4, 5 and 6 for each original.
Scanned files
The right pane of the Océ Scan Manager contains the scanned files and
additional information about the files. You can view, print and delete these
files. You can also view the file properties.
▼
View a scanned file
1
Select a file in the right pane.
2
Open the ‘File’ menu and select ‘View’ or click the ‘View’ button on the
toolbar (see figure 64).
[64] ‘View’ button on the toolbar
Océ View Station LT (see ‘Océ View Station LT®’ on page 131) starts up and
displays the file.
When you enable ‘Automatic view’ on the Océ Scan Manager, Océ View
Station LT starts up automatically after scan to file.
Note:
When you scan to file the controller Océ View Station LT starts
automatically, showing the result of the scan.