Oce TDS750, Руководство пользователя

Страница: 9 / 24

• Do not use flammable sprays, liquids or gases near this product, because this could
cause a fire.
Note
• We recommend that you only connect copy-control products (or other products) that
meet (inter)national product safety and radio frequency interference standards. Only
use an attachment cable as specified by the manufacturer.
Ventilation
Caution
•
The machine can produce odors of exhaust air when you:
– use this machine in a poorly ventilated room for a long time
– produce large amounts of copies or prints
Therefore, make sure that you ventilate this room well.
• Do not block the ventilation openings of the machine.
• Do not place the machine in rooms which are too small and insufficiently ventilated.
See the Product Safety Data Sheet of the machine for the ventilation requirements.
Actions in response to troubles
Warning
•
When a piece of metal, water or any other similar foreign matter gets inside the ma-
chine, immediately turn OFF the power switch and unplug the power cord from the
power outlet. Then call your authorized service representative.
• Immediately stop using the machine if the machine becomes excessively hot, emits
smoke, or produces unusual odors or noises. Immediately turn OFF the power switch
and unplug the power cord from the power outlet. Then call your authorized service
representative.
Caution
•
Stop using the machine if the machine was dropped or a cover was damaged. Imme-
diately turn OFF the power switch and unplug the power cord from the power outlet.
Then call your authorized service representative.
• Some areas inside the machine become hot. Touching these areas could cause burns.
When you check for malfunctions inside the machine, such as a paper misfeed, do
not touch the spots labeled "Caution HOT". You can find these labels around the
fusing unit, for example.
• LCD display. Do not rub, press or touch the display surface with hard material, because
the polarizer at the surface can be easily scratched. The LCD module consists of glass.
Therefore, the LCD module can damage when you drop, pinch strongly or punch
the module. When glass breaks, be careful that you do not get injured by glass pieces.
Call Customer Service.
Chapter 1 - Instructions for safe use 9
Instructions for safe use