Oce TDS750, Руководство пользователя

Страница: 7 / 24

Disassemble and modification
Warning
• Do not remove covers and panels which are fixed to the machine. Some machines
have a high-voltage component or a laser beam source inside that could cause an
electrical shock or blindness
• Do not modify this machine, because this could cause a fire, electrical shock or
breakdown. If the machine contains a laser, the laser beam source could cause blindness.
• The fuser must be closed during normal operation. The fuser may only be opened to
remove paper after a paper jam. Because of hot surfaces, the operator must always be
cautious and wear heat-protective gloves when removing printing material in the fuser
section.
• Turn off the machine before opening the fuser.
Caution
•
Do not carry out maintenance activities for other components and maintenance ma-
terials than the components and materials that are mentioned in the user manual.
• Do not place any liquids on the machine.
• Do not open any door while the machine starts up or runs, unless the operator panel
displays a message that asks you to open one or more doors.
• Use maintenance materials or other materials for their intended purpose only.
• To avoid any risk, only properly qualified and trained service technicians are allowed
to modify the machine.
• Do not bridge any mechanical or electrical circuit breakers.
• Exercise caution when placing rolls in the printer. If the Océ TDS750 printer is not
equipped with the optional roll loader, the NIOSH limit value for handling loads will
be exceeded if rolls of imaging materials having a net weight of more than 7 kg/15.4
lbs (i.e. a width of more than approx. 50 cm or 20 inches) are placed in roll positions
nos. 2, 4 and 6 by only one person.
• Only one drawer can be opened at a time. This is to prevent overbalance of the
printer.
• Keep maintenance materials away from children.
Note
• The left cover must be closed during normal operation. This is necessary to ensure
proper operation.
Power cord
Warning
• Do not use any power cable other than the one provided. Never use the power cable
with any other electrical device.
• Do not scratch, abrade, heat, twist, bend, place a heavy object on or cause any other
damage to the power cord. The use of a damaged power cord (exposed core wire,
broken wire, for example) could result in a fire or breakdown. If you find any of these
Chapter 1 - Instructions for safe use 7
Instructions for safe use