Oce TDS600, Руководство пользователя

Страница: 43 / 338

Use the Océ TDS600 to copy 43
The five function buttons (below the display) allow you to select functions or
subfunctions within a card.
Finally, the arrow buttons can be used, like the numeric buttons, to define
numeric settings. The arrow buttons are also used for selecting subfunctions.
Sections on the operator panel
The operator panel of the Océ TDS600 Copier consists of the following
sections:
■
Custom
■
Original
■
Print
■
File
Custom section
Upon start-up of the Océ TDS600 Copier, a number of default
settings are available from the ‘Custom’ section. These settings, which can
also be found in one of the other two sections, are the most commonly used
options on the Océ TDS600 Copier. The key operator can change the contents
of the ‘Custom’ section from the Océ Settings Editor on the controller (see
‘Custom card’ on page 153).
By default, the ‘Custom’ section includes the ‘Media’, ‘Input mode’ and
‘Zoom’ settings plus one or two others. This could be, depending on your
configuration and language settings, the ‘Folding’ (if you have a folder),
‘Language’ (if you work with more than one language) or ‘Exposure’ settings.
See figure 10 on page 41 for an example of the ‘Custom’ section.
Original section
The ‘Original’ section contains all original-related settings,
divided over a number of cards. The following cards are available (top to
bottom):
■
Scanner
■
Image
■
Sheet
■
Feeding
Each card contains a number of specific options, as is shown below.