Oce TC4, Руководство пользователя

Страница: 25 / 204

Turn on and off the Océ TC4
Introduction
You can turn on and off the Océ TC4 scanner. The Océ TC4 Power Logic
®
controller
is switched on and off separately from the scanner. You do not have to use a specific order
in which you turn on and off the Océ TC4 and scanner.
Power On / off
#
Action Part
Use the On / Off switch at the front underneath the original feed
table on the scanner to turn on and off the scanner. Scanner
Use the power key at the front of the controller.
Use the On / off key.
When the controlller is on:
Press the key only once and wait 30-60 seconds. The green LED of
the key turns off to indicate that the controller is turned off. Keep
the key pressed for 4 seconds to immediately turn off the controller.
When the controller is off:
Press the key only once to start up the controller. The green LED
is turned on when you press the key.
You can also shut down the controller in the Océ TC4 Power Logic
®
controller application. Access the System menu in the top toolbar
to do so.
Océ TC4
Power Logic
®
controller
Chapter 1 - Introduction 25
Turn on and off the Océ TC4