Océ Scanner Agent
13
Scanner mode
What the scanner is doing at any given moment. Here is a list
of the different scanner modes:
Scanner mode
Description
"<N/A>"
Scanner not accessible. Océ Scanner Agent has not (yet)
detected the scanner.
"Scanner is unsupported."
The connected scanner is not a model compatible with
Océ Scanner Agent.
"Scanner is busy or turned
off."
This message is displayed while downloading firmware
to the scanner.
"Programming Mode.
Firmware may be down-
loaded."
The scanner is in this mode when firmware is being
downloaded with the firmware.exe program.
"Initializing"
The scanner is initializing its settings (start-up).
"Warming Up"
The scanner needs to warm up before it can function in
optimal conditions. This takes a few minutes.
"Ready"
The scanner is ready for scanning.
"Not Ready. Error detect-
ed."
An error was detected. View the error message.
"Test Mode"
The scanner test mode is used during technical service.
"Continuous self-test
mode"
The scanner is performing test operations to ensure opti-
mal performance: light profile corrections, stitching, etc.
"Calibrating"
The scanner is performing calibration of the cameras.
"Adjusting"
The scanner is adjusting its cameras.
"Standby"
The scanner is in standby mode when the LED indicator
is red. The Timer powers the scanner on and off from the
standby mode.
