Introduction
45572-I
see copyright, disclosure, use and duplication information on pg. iii
1-1
1
Introduction
This manual is applicable to both the LightJet 430 and LightJet 430RS printers. All references
to the LightJet 430 also refer to the LightJet 430RS.
The LightJet
®
430 is a wide format digital color printer capable of producing large
photographic quality images on various paper and film materials from several data formats. The
photographic media is held stationary during imaging in an internal drum. Media advances are
required between imaging times. The standard operating mode of the printer is roll to roll.
Using This Guide
This Site Preparation Guide describes the physical attributes and site requirements necessary for
installing and operating the LightJet
®
430 digital photo printer. The guide is structured as
follows:
Chapter One describes the contents of the document and some important safety
information for all users of the printer.
Chapter Two describes the shipping, handling, location and installation requirements for
the LightJet
®
430, including customer-supplied equipment.
Appendix A
is a Pre-installation Site Checklist that will help you ensure that your site is
prepared for LightJet
®
430 installation.
Important Safety Information For All Users
This is a Class 1 laser product meeting laser safety requirements of 21 CFR 1040 and
EN60825-1 as applicable. Laser devices contained within this equipment are hazardous. All
procedures necessary to perform user functions are outlined in this document. Internal lasers
have the following output characteristics under maximum conditions:
Laser Type
Wavelength
(nm)
Output Power
(mW)
Beam Divergence
(mRad)
Helium Neon (HeNe) Red Laser:
633
14
1.4
Helium Neon (HeNe) Green Laser:
543
1.7
1.0
Argon (Ar+) Blue Laser:
458
2.5
1.0
Table 1-1. LightJet
®
430 laser specifications
