Oce im4512, Руководство по эксплуатации факсимильного аппарата

Страница: 62 / 116

4-2
TRANSMISSION BETWEEN MACHINES
SUPPORTING F-CODES
This machine supports the "F-code" standard as established by the ITU-T*.
Operations such as relay broadcast transmission and confidential transmission previously could only be performed with
another Imagistics fax machine; however, F-Code communication makes it possible to perform these operations with fax
machines of other manufacturers that support F-Code communication.
Before using the functions explained in this chapter, make sure that the other fax machine supports F-Code communication
and has the same functions as your machine. (the other machine may use a different name for the function).
* The ITU-T is a United Nations organization that establishes communications standards. It is a department of the International
Telecommunication Union (ITU), which coordinates global telecommunications networks and services.
MEMORY BOXES AND SUB-ADDRESSES/PASSCODES
REQUIRED FOR F-CODE TRANSMISSION
"Memory boxes" can be created in the memory of fax machines that support F-Code communication. These boxes are
used to store faxes received from other machines and documents to be transmitted when a polling request is received.
Fax machines that support F-code transmission enable the creation of a
"memory box" in the unit's memory. The
memory box is used to store documents received from another fax machine or documents to be sent when another
machine polls that machine. Up to 100 memory boxes can be created for a variety of purposes, and a name can be
assigned to each box. A
"sub-address" that indicates the box's location in memory must be programmed, and if
desired, a passcode can also be programmed to control access to the box.
*The Public Box is used for normal serial polling (See "USING POLLING MEMORY" on page 3-15).
When communication occurs involving a memory box, the communication will only take place if the sub-address and
passcode that the other machine sends match the sub-address and passcode programmed in your machine for that
box. Therefore, to allow communication, you must inform the other party of the sub-address and passcode of the
memory box. Likewise, to send a document to a memory box in another machine or use polling to retrieve a
document from that memory box, you must know the sub-address and passcode of that memory box. (Box names
are used only to manage boxes in the machine; you do not need to inform the other party of a box name the other
party only needs to know the sub-address and passcode.)
This machine uses the term "sub-address" for the location of the memory box and the term "passcode" for the
password that allows communication; however, other fax machines of other manufacturers may use different terms.
When asking the other party for a sub-address and passcode, you may find it useful to refer to the 3-character
alphabetical terminology used by the ITU-T.
0001
Imagistics
11245
Document
Group 1
7732123
3321 1115
7732123
7732123
Product Planning
Dept.
1115
Product
Planning
Dept.
3333
Department
Manager
11111111
4444
Public Box*
123456
010
Section
Manager
Reports
MEMORY
Sub-address (location in memory)
Select any number up to 20 digits.
Box name (used to manage
boxes in your machine)
Select a name of up to 18
characters.
Passcode (key)
Select any number up to 20 digits.
(Not required)
1115
Product Planning
Dept.
This machine ITU-T
F-code polling memory box F-code Confidential box F-code Relay Broadcast Function
Sub-address SEP SUB SUB
Passcode PWD SID SID
Tiger2_fax_sec.book 2 ページ ２００４年１２月１５日 水曜日 午前１１時４分