manualshive.com logo in svg

Oce DJDE, Справочное руководство

Поделиться
Скачать
Oce DJDE Скачать руководство пользователя страница 199

Dynamic Job Descriptor Entries (DJDEs)

Page- and Record-oriented DJDEs

A29247-X4-X-8-7672

191

LOGO=
(

name

, 

vpos

 

units

,

hpos

 

units

[, H]
[, (INKS, 

in-

kindex

[, 

inkindex

]

[, ...])])

name

Specifies the name of the logo. A logo specified through PDL will appear on all 
pages of a record. A logo specified through DJDE will appear only on the current 
page unless the hold option is specified.

vpos

Specifies the vertical position (top left corner of page) of the top edge of the logo, 
as an offset relative to 0,0 on the current physical page (the position that would 
be specified by a PDE BEGIN of 0,0). This parameter is specified as a decimal 
number with up to three digits to the right of the decimal point.

hpos

Specifies the horizontal position of the left edge of the logo as an offset, relative 
to 0,0 on the current physical page. The 

units

 of the specification is the same as 

for vpos. This parameter is specified as a decimal number with up to three digits 
to the right of the decimal point.

units

DOTS (300 dots per inch), XDOTS (600 dots per inch), centimeters (CM), user-
defined units (UN) or inches (IN). If no units are specified, inches are assumed.

H
Specifies that this logo is to be held and imaged without further references, at the 
same position and with the same scale factor on all subsequent pages until 
changed by a DJDE CANCEL= or ALTER=.

inkindex

Specifies which inks in the ILIST parameter of the IDR command override the 
corresponding inks specified in the inklist of the logo. The logo must be in colour 
format.
If one inkref in the list is omitted, commas must be used to maintain the relative 
positioning of the remaining ink references.
If more inkrefs are specified than contained in the inklist of the logo, the extra 
inkrefs are ignored.
If any of the inks to be substituted where specified in the logo definition with a 
NOSUBSTITUTION parameter ink requests are processed according to what is 
specified in the ISUBSTITUTE parameter of the ABNORMAL command.
Only references to primary colours are allowed.

DJDE

Definition(s)

Содержание DJDE
































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды